Current 4G wifi model offered by Rcom for cdma customers is ZTE WD670 whose specs are: Qualcomm MDM9307 Chipset 2300Mah Battery Band 5/3/40 ready with max Cat4 speed of DL150mbps UL50mbps Led indicator for 4G Status,Power Status,WIFI Status Wifi encryption support of WEP, WPA, WPA2, WPA-PSK, WPA2-PSK, WPS VOLTE/SMS/PUK-PIN support. Press and hold to turn your Airtel 4G HotSpot on or off. Micro USB port Signal indicator. Green: Connected to a 4G network. Yellow: Connected to a 3G network. Red: Connected to a 2G network. Blinking red: No signal or sim card is not recognized, etc. Press and hold to restart your Airtel 4G HotSpot and restore it to.
This post guides you on how to configure Airtel 4G hotspot device on your own.
If you have not done configuration of any router before, don’t worry. It’s really easy and simple as I will guide you through a complete step by step procedure to setup and configure your Airtel 4G hotspot device.
All you need to do is read the whole content and follow along with me.
First thing first…
How do you connect or use the airtel 4G hotspot device for the first time? To do that…
Firstly, you need to open up the back panel of the device and take out the battery from it and insert an Airtel 4G sim recharged with valid 4G plans.
When you take out the battery, you will notice some parameters written on the label.
You can see these on the image below.
Under WiFi key field, the password of the hotspot device is written. Now, I want you to write down that password.
Turn on the hotspot device by long pressing the key in the middle and also turn on the WiFi of your Laptop/PC/Mobile device and connect to the wifi network using the password written on the back of the hotspot device.
You can configure the airtel 4G hotspot WiFi device from your mobile device too, but if you’ve got a PC or laptop nearby, it is a lot easier to configure from there.
Once you are connected to the WiFi network of the hotspot, the very first thing you want to do is login straight to your Airtel 4G hotspot and change that ugly looking ever-ending defaultWiFi password.
You don’t want to remember that long complicated password each time you need to connect a new device to the 4G hotspot. Do You?
Type 192.168.1.1 on the address bar of the browser installed on your Laptop/PC/Mobile and press Enter. 192.168.1.1 is the default login IP address of the Airtel 4G hotspot.
Now a screen will appear in front of your display. That is the router configuration page of your tiny Airtel 4g hotspot device.
Now as you try to click on any of the navigation menu (Statistics, SMS, USSD etc.) you will be prompted to put a username and password.
Here, you need to put as admin on both the username and password field. Because admin is the default login username and password of the Airtel 4G hotspot device.
Once you are logged in, you will be able to do a various operation like changing wifi password, changing SSID(name of the WiFi access point), block wifi users from your network and many more.
I believe, by now you are successfully logged in to the hotspot.
Now click on the settings → WLAN → WLAN Basic Settings.
A screen appears with SSID(network name), security mode and WPA pre-shared key(wifi password).
The default SSID i.e name of your hotspot network Airtel-E5573 is too boring. Who wants to remember that? change it right away to a cool and catchy SSID.
Don’t Hit Apply yet…we are not finished.
Next thing you want to do is select security mode. By default, the security mode is selected as WPA2-PSK. If it is not, then select WPA2-PSK as security mode, as it is the most secure wifi encryption technology used in your Airtel 4G hotspot.
It’s time now to change WiFi password of Airtel 4G hotspot device because that default password you used to connect your device for the first time is ugly and definitely not easy to remember
Microsoft activex data objects 2.8 library mac. Thank you very much.'
The password of your hotspot device is written under WPA Pre-share key. WPA Pre-shared key simply means password of your WiFi. Delete whatever written under it and give a new password to your WiFi. To make it stronger use an uppercase letter along with a special character and numerics.
Now Click on Apply.
As soon as you click on apply, all your devices connected to the hotspot would get disconnected as you’ve changed the name of the WiFi network and password.
Now reconnect the device with newly changed WiFi password and you are ready to go.
Remember when we used admin as default username and password to login to the hotspot device at the beginning?
Let me tell this, it is not a good practice to leave that password as admin. If you do that, you are letting the hotspot device to a DDOS attack.
So, let’s change this now.
The screenshot attached above is self-explanatory on how to change default login password i.e admin of your Airtel 4G hotspot.
I am going to explain this in words anyway.
Click on settings → System → Modify password.
Here you need to put admin as Current password.
Requires download(s) (significant storage, broadband, and ISP fees apply) and Microsoft account. May require additional hardware and subscriptions. Xbox Game Pass discounts are based on Microsoft Store price and are not combinable with other offers and are not redeemable for cash. Age restrictions apply. Discount offers exclude titles within 30 days of launch and are not available with select titles. Pc games installer download. Cancel at Notice before purchase of add-ons, DLC, consumables, virtual currency, or subscriptions (sold separately): If your membership terminates or a game is removed from the catalog, you must reactivate your membership or buy the game separately to continue using these items.
You need to give a strong New password which is well described on that page.
Confirm the password and click on Apply and don’t forget to note that new password somewhere. Because we don’t login to the hotspot every day and chances are that you will forget that soon.
That’s it. You have successfully configured your Airtel 4G hotspot device now. But…
Hang on… there are some bonus tips for bpedia reader, if you have enough time then you can read my two bonus tips.
I promise you, this will not be your waste of time at all.
So how to block unwanted wifi users connected to your Airtel 4G hotspot?
The process is really simple, but you have to know who is connected to your wifi either by knowing their assigned IP address or MAC address.
Once you know which device to block. Click on Statistics.
A screen appears with all the connected device and its IP address and MAC address. Here you need to know which device to block and for that, you want to know their IP address or MAC address.
Once you figure out which device to block, click on the Block written against that particular device.
The blocked devices will appear under Blacklist, You can unblock them later if you want.
Question is how do you know if you are staying in an overly crowded WiFi zone. This trick is really simple. Just turn on the WiFi on your mobile and see how many access points are there. If there are more then 5-6 access points then you are staying in the crowded zone.
So what’s the solution?
The operating frequency of Airtel 4G hotspot device is 2.4GHz which is more prone to interference due to its overlapping channel. Unlike the 5ghz band, it does not have non-overlapping channels. To get rid of this problem, you can do one simple thing.
Go to Settings → WLAN → WLAN Advanced setting.
A screen will appear as shown above.
By default, the channel is set to Auto. But if you stay in a wifi crowded zone then you might want to change that auto setting to either channel 6 or channel 11.
Why 6 or 11?
Because there are 11 channels starting from 1 to 11 in a 2.4 GHz WiFi band. Out of these 11 channels, only channel number 1, 6 and 11 are non-overlapping.
If you choose a non-overlapping channel then you are reducing the chance of interference caused by other devices.
That’s it for this post, I hope you’ve liked this post on the configuration of Airtel 4G hotspot along with some bonus tips.
If you want anything to cover or if you need any help with your Airtel 4G hotspot device, then you can put your queries on the comment section below or you can browse bpedia from desktop and click on that little Free Chat support button displayed on the left bottom corner. See-Ya.