The same casting experience available on Microsoft's Surface Hub and Windows has finally arrived on Xbox One! Microsoft's Wireless Display app lets you wirelessly project your Windows or Android based devices to your Xbox One. Instantly share photos you've just taken with family and friends without having the photos sync through a cloud service.
This application supports wired or wireless connection of screen display images from a computer to a wireless ready Panasonic projector.
Be sure to uninstall the old version of the software before upgrading to the new version.
PT-MZ770/MZ670/MZ570/MW730/MW630/MW530
PT-VZ585N/VW545N/VX615N
PT-VZ575N/VW535N/VX605N
PT-VW355N/VX425N
PT-VW435N/VX505N (Discontinued models)
PT-VW345NZ/VX415NZ (Discontinued models)
PT-JX200/JW130
Note: Application is possible to the following models, but restrictions vary depending on the model.
For details, see the List of compatible projector models.
PT-DZ570* / DW530* / DX500* / FW430* / FX400* / FW300NT / FW300** / F300NT / F300**/ VX400NT / LB90NT / LW80NT / LB80NT / LB75NT
Download and install VLC media player on your Mac and launch the program.Step 2. Mac download utube. It also enables you to download a YouTube video on your computer, be it Mac, PC, or laptop.Step 1.
* To operate wireless projection, the optional Wireless Module ET-WM200 is required.
** The PT-FW300 and PT-F300 support a wired LAN system only.
Version 6.4 (6.4.0 (24))
Click buttons below to check out version information.
Update information from Version 6.3 (6.3.0 (15))
NOTE: Wireless Manager ME 6.3 is used in this video as an example. Images used in this video may differ from those shown on your screen.
The computer must meet the following requirements in order to use the supplied software.
OS | Apple Mac OS X v10.10 / v10.11, macOS Sierra/High Sierra/Mojave/Catalina * The Japanese, English and Chinese versions of the above operating systems are supported. * Operation is guaranteed only with preinstalled or clean-installed operating systems. |
---|---|
CPU | Intel Core 2 Duo or higher processor or compatible processor installed. Intel Core i5 or higher recommended for projection. |
RAM | 1,024 MB or more |
Hard disk | At least 100 MB free space (Extra free space is required to save the projector information.) |
LAN environment | For connection by wired LAN: LAN terminal (10BASE-T/100BASE-TX/1000BASE-T) is necessary. For connection by wireless LAN: Wireless LAN adapter (IEEE 802.11b/g/n/a standard compliance) is necessary. |
Monitor screen | High Color (16 bits) or up |
Desktop area | 1024 dots x 768 dots or more, 2880 dots x 1800 dots or less |
Web browser | Safari 8.0/9.0/10.0/11.0/12.0/13.0 (For the WEB Control function, Browser Remote Control function, moderator mode, and Content Manager function.) |
NOTE:
• If you are logged in to a “normal” user account, sound may not be output from the computer. If sound is not output from the internal speakers, quit this software, and then make sure that “Internal Speakers” is selected in “Output” of “Sound” in “System Preferences”. If it is not selected, manually switch to “Internal Speakers”.
• On a computer that has an automatic graphics switching function, projection may fail if “System Configuration” →“Energy Saving” → “Automatic Graphics Switching” is enabled. If projection fails, disable this function.
• When connecting under the IEEE802.11n standard, the wireless LAN adapter, projector and access point used must all support the 11n standard.
• When using the projector at the [S-DIRECT] or [M-DIRECT] setting, use a wireless LAN adapter that supports “WPA2/AES”.
• The “App Nap” function may cause image display to stop. In such cases, disable the “App Nap” function. For details on disabling the function, see “Image display stops” in Frequently Asked Questions section.
• For a projector, the display resolution of projected images differs depending on the aspect ratio of the display device of the projector used.
- When 4:3: Images of 1024 x 768 dots are displayed with the number of display dots of the projector.
- When other than 4:3: Images of 1280 x 800 dots are displayed with the number of display dots of the projector.
• For a flat-panel display, images of 1280 x 800 dots are displayed with the number of display dots of the flat-panel display.
Operation is not guaranteed for all computers that meet the above conditions.
For specific installation instructions, refer to the following manual.
Mac, Mac OS X and macOS are trademarks or registered trademarks of Apple Inc. in the United States and/or other countries.
Intel and Intel Core i5 are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and/or other countries.
Other company names, product names, or other names noted on this page are trademarks or registered trademarks of the respective companies. Note that ® and ™ marks are not indicated on the text of this page.
To communicate with a Wi-Fi network, a device must identify itself to the network using a unique network address called a Media Access Control (MAC) address. If the device always uses the same Wi-Fi MAC address across all networks, network operators and other network observers can more easily relate that address to the device's network activity and location over time. Spectrum analyzer download vst. This allows a kind of user tracking or profiling, and it applies to all devices on all Wi-Fi networks.
To improve privacy, iOS 14, iPadOS 14, and watchOS 7 use a different MAC address for each Wi-Fi network. This unique, static MAC address is your device's private Wi-Fi address, used for that network only.
Using a private address doesn't affect how you join or use most Wi-Fi networks. Simply connect to Wi-Fi like you normally would. For improved privacy, leave the Private Address setting on for all networks that support it.
If you erase all content and settings from your device, or you use the Reset Network Settings feature, your device will use a different private Wi-Fi address the next time it connects to the Wi-Fi network.
If you manage a Wi-Fi router that's configured to notify you when a new device joins the network, you'll be notified when a device first joins with a private address.
In some cases, a network might not allow devices with a private address to join, or the device can join but the network won't allow any further access. In such cases, you can choose to turn off the Private Address setting for that particular network.
To stop or resume using a private address with a specific Wi-Fi network:
The Private Address option is on by default in iOS 14, iPadOS 14, and watchOS 7. Businesses and other organizations may need to update their Wi-Fi network security to work with private addresses. Otherwise, they may choose to turn off the Private Address setting for their Wi-Fi network via an MDM-defined network profile. Learn more about private Wi-Fi addresses and enterprise.