Devastator led tool for mac. It is for information purposes only.
Super UserThe DriveRack 4800 provides a full color screen to speed manual operation and decrease eye fatigue; this combined with the ergonomically designed front panel make the navigation incredibly intuitive. From control to processing, the DriveRack 4800 is everything you want in a system Processor. 4-input, 8-output system controller. The dbx 286A’s sonically pristine Mic Preamp has all the features you need, including wide-ranging input gain control, switchable 48V phantom power and an 80Hz high-pass filter. Use the 286A’s newly designed and patented OverEasy® Compressor to transparently smooth out uneven acoustic tracks or deliver that classic “in your face” rock. The DriveRack 4800 is the next generation of the famous DriveRack family, and like its predecessor it is engineered to provide 'Everything you need between the mixer and the power amps'. In keeping with this philosophy the 4800 includes four inputs and eight outputs with both analog and digital connectivity. Item 1 dbx DriveRack 4800 4820 Loudspeaker Management System OWNER'S USER MANUAL 1 - dbx DriveRack 4800 4820 Loudspeaker Management System OWNER'S USER MANUAL.
Designed to provide incredible flexibility, sonic excellence and intuitive control for performance applications, the DriveRack® 4800 is the new flagship of the hugely successful DriveRack family. From the powerful 96 kHz DSP engine and standard analog and digital I/O, to the QVGA display and multiple control surfaces, the 4800 provides all the processing, flexibility and control necessary for both installation and live use. The menu-based set-up procedure includes selectable DSP inserts on all inputs and outputs including classic dbx compression, limiting and advanced feedback suppression (AFS) among others.
The DriveRack 4800 is the next generation of the famous DriveRack family, and like its predecessor it is engineered to provide 'Everything you need between the mixer and the power amps'. In keeping with this philosophy the 4800 includes four inputs and eight outputs with both analog and digital connectivity. The 96 kHz processing engine is capable of offering insert processing functions to customize the processing path for your application, in addition to the standard system processing functions all with extremely low latency and extended frequency response.
From Signal Routing, EQ, and Bandpass Filters, to classic dbx® Dynamics and Feedback Suppression all the processing is available and with the sonic excellence that you would expect from the world's leading system processing manufacturer. With all this processing power available, control is of paramount importance. The DriveRack provides a full color display to speed manual operation; this combined with intuitive front panel controls, an easy to use GUI and optional wall panel controllers means that whether your application is tour sound or installation, the DriveRack 4800 has what it takes.
Input | (4) total |
Input Connectors | Female XLR |
Input Type | Electronically balanced, RF filtered |
Insert Impedance | >50k ohm |
Max Input | Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu |
CMRR | >40 dB typical, >55 dB at 1 kHz |
Digital Inputs | (4) AES/EBU Channels |
Digital Input Connectors | Female XLR |
Digital Input Type | Transformer Isolated, RF filtered |
Digital Input Impedance | >110 ohms |
Mic Preamp Connector | (RTA) - (1) Female XLR |
Mic Preamp gain | (RTA) 10dB to 50dB in 10dB increments |
Output | 8 total |
Output Connectors | Male XLR |
Output Type | Electronically balanced, RF filtered |
Output Impedance | 30 ohms |
Max Output | Software selectable for: +24, +22, +20, +12, +8, +4 dBu |
Digital Output | (8) AES/EBU Channels |
Digital Output Connector | Male XLR |
Digital Output Type | Transformer Isolated, RF filtered |
Digital Output Impedance | >110 ohms |
A/D Converter | dbx Typve IV™ Converstion System |
A/D Dynamic Range | >114 dB unweighted, 116dB A-weighted |
Type IV Dynamic Range | 128dB with transient material, A-weighted, 22kHz BW 126 dB with transient material, unweighted, 22 kHz BW 120 dB typical with program material, A-weighted, 22 kHz BW |
Sample Rate | 96kHz |
Wordlength | 24 bits |
D/A Dynamic Range | 112 dB unweighted, 115 dB A-weighted |
Dynamic Range | 112dB unweighted, 115dB A-weighted |
Internal Processing | 32 bit floating point |
THD+Noise | 0.004% typical at +4 dBu, 1 kHz, 0 dB input gain |
Frequency Response | 20 Hz- 40 kHz, +/-0.5 dB |
Interchannel Crosstalk | <-85 dB at 1 kHz, 0 dB input gain |
Pre EQ Type | One 31-band Graphic EQ on each input One EQ that is switchable between 31-band and 9-band Parametric on each input |
EQ Gain | +/- 12dB |
Input Insert Processing | Two selectable Insert Processing blocks per input: Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression |
Input Delay Length | Up to 682 mSec available |
Routing/Mixing | 4-input mixer available at each output allowing any input to be sent or mixed to any output |
Output Insert Processing | Two selectable Insert Processing blocks per output: Noise Gate, AutoWarmth®, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression |
Crossover | configs: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8 |
Crossover Filter Type | Bessel 6, 12, 18, and 24 dB per Octave Butterworth 6, 12, 18, and 24 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave |
Polarity | Positive and Negative |
Phase Control | 0 to -180 degrees in 5 degree increments |
Output Delay Length | 1365 mSec shared between the outputs |
Transformer | I/O: optional |
Controls | Ethernet, RS-232, Optional dbx ZC Wall Panels |
Power Consumption | 100V to 240V 50/60Hz, 45 Watts |
Dimensions | 3.5'x19'x12.15' |
设备重量 | 11 lbs. |
Shipping Weight | 12.5 lbs. |
Barbie horse adventures riding camp free download mac. dbx introduced the new DriveRack 4800 System Processor, which provides versatility and intuitive control for live performance applications and is the next generation of the line of DriveRack processors. Featuring all the familiar processing functions and a host of new algorithms, including dbx’s Advanced Feedback Suppression (AFS™), the DriveRack 4800 is designed to provide the front-of-house (FOH) engineer, monitor engineer and systems design contractor with the necessary control tools for any live sound reinforcement situation.
The unit’s 96kHz processing engine and standard digital I/O extends frequency response and reduces latency, while an optional CobraNet™ card enhances the versatility. Using four analog and AES/EBU inputs, with eight analog and AES/EBU outputs, the DriveRack 4800 also features Harman Professional’s latest HiQnet™ protocol.
The HiQnet control backbone can be used to monitor and control signal routing, as well as the processing of multiple DriveRack 4800 units from various locations, all using standard Ethernet equipment including routers and wireless access points. HiQnet control extends to the new Harman Professional System Architect GUI, which provides user-assignable signal routing, control groups and customized control panels.
Harman Professional System Architect GUI supplies complete manipulation capability of not just the DriveRack 4800 but also any other HiQnet-enabled Harman Professional products, such as Crown I-Tech amplifiers, JBL DrivePack loaded speakers, AKG WMS 4000 wireless microphones and the Studer Vista 8 mixing console.
The dbx DriveRack 4800 is available for $3,749.95.
For more information, please go to www.dbxpro.com and mixonline.com/livesound/products.